Google+ Badge

Wednesday, January 22, 2014

Appliance Repair Boise | Appliance Gaskets

How to Replace a Gasket in Your Home Appliances?

As the owner of a Appliance Repair Boise company, one of the most common and basic components in major home appliances such as a refrigerator or a washing machine is the gasket. The role of a gasket is to prevent leakage of air and water, and in the process increasing the efficiency of the appliance. If the gasket of your home appliance has failed, it must be replaced at the earliest possibility.

Inspect the Gasket

You can conduct a physical inspection of the gasket to determine whether it needs a replacement. The gasket should feel spongy, but if you find that it has hardened, or it has developed cracks and tears at places, it needs to be replaced. Rather than go for a universal, one-size-fits-all gasket, you should replace a defective gasket with a new one that is specifically designed for your appliance.

Clean Before Installation

While replacing an old gasket with a new one, you can follow a few simple steps to do the job efficiently on your own. As a first step, remove the old, faulty gasket. If it is channel mounted, you must it pull out of the channel carefully. In case it is flush mounted, you can take out the fasteners, retaining strip or panel to remove the old gasket. Before you are ready to install a new gasket, clean the gasket area with liquid detergent and warm water thoroughly. Thereafter, allow it to dry completely.

It should be Smooth

Now you can begin installing the new gasket, easing it around the corners and smoothing it evenly into its place. If the manufacturer specifies the use of gasket cement, you must follow the guideline. If you are placing a channel mounted gasket, use a splinting tool to press it into place. No part of the new gasket should be curled under or sticking up, and the entire gasket must be smoothly positioned. Finally, use mineral spirits to remove any excess gasket cement, but make sure the appliance’s finish is not damaged in the process.

No comments:

Post a Comment